CZPT hydraulic piston motor assembled in China with ideal quality
Brueninghaus Hydromatik CZPT A6VM motor
CZPT Variable motor A6VM55, A6VM80, A6VM107, A6VM140, A6VM160, A6VM200, A6VM250
| Description |
Open and closed circuits
Series 63
Dimension Nominal stress, 28 to two hundred (four hundred bar/450 bar)
250 to one thousand (350 bar/four hundred bar)
– Variable A6VM motor with axial tapered piston rotary team of bent axial style, for hydrostatic drives in open and closed circuits
– For use in cell and stationary applications
– The vast handle assortment enables the variable motor to satisfy the requirement for higher velocity and large torque.
– The displacement can be infinitely altered from Vg max to Vg min = .
– The output speed is dependent on the flow of the pump and the displacement of the motor.
– The output torque will increase with the strain differential amongst the higher-strain and reduced-stress facet and with increasing displacement.
– Extensive handle selection with hydrostatic transmissions
– Wide variety of control devices
– Expense cost savings through elimination of equipment shifts and likelihood of making use of smaller pumps
– Compact, robust motor with long services daily life
– Substantial electricity density
– Good commencing qualities
– Little swing torque
CZPT Data of Brueninghaus Hydromatik CZPT A6VM Motor
Table of values (theoretical values, CZPT efficiency and tolerances values rounded)
| CZPT A6VM motor | A6VM55 | A6VM80 | A6VM107 | A6VM140 | A6VM160 | A6VM200 | A6VM250 | |||
| Nominal strain | p N | bar | 400 | four hundred | 400 | four hundred | 400 | four hundred | 350 | |
| Highest strain | pmax | bar | 450 | 450 | 450 | 450 | 450 | 450 | four hundred | |
| Displacement | Vg max | cm³ | 54.eight | eighty | 107 | a hundred and forty | 160 | two hundred | 250 | |
| Velocity | at V g max | n max | rpm | 4450 | 3900 | 3550 | 3250 | 3100 | 2900 | 2700 |
| Velocity | at V g<V g max | n max | rpm | 7000 | 6150 | 5600 | 5150 | 4900 | 4600 | 3600 |
| Inlet circulation | at nmax | q V max | l/min | 244 | 312 | 380 | 455 | 496 | 580 | 675 |
| Torque | Δ p = 400 bar | T | Nm | 349 | 509 | 681 | 891 | 1019 | 1273 | 1391 |
| Fat (approx.) | m | kg | 26 | 34 | forty seven | sixty | sixty four | 80 | 90 | |
CZPT fluid
Prior to commencing task plHangCZPT, you should refer to our data sheets RE 95710 (mineral oil), RE 95711 (environmentally suitable hydraulic fluids), RE 95712 (HFD hydraulic fluids) and RE 95713 (HFA, HFB, HFC hydraulic fluids) for thorough information regarding the choice of hydraulic fluid and application conditions.
The variable motor A6VM is not suited for procedure with HFA hydraulic fluid. If HFB, HFC, or HFD or environmentally satisfactory hydraulic fluids are used, the limits concerning specialized info or other seals need to be noticed.
