Aluminum Auto Part by Die Casting

Aluminum Auto Part by Die Casting

Aluminum Car Part by Die Casting

Technological innovation Conditions: 
one. CZPT & TS 16949 Licensed.
two. Goods Content CZPT: ISO, GB, ASTM, SAE, ISO, EN, DIN, JIS, BS
3. Die casting products capacity: 180T/280T/400T/600T/800T/1000T
four. Item bodyweight assortment: From .05 kg to 50kg
five. Primary method: Higher Strain Die Casting, Minimal Strain Die Casting, Gravity Casting, Deburring, Sandblasting, Machining, Penetration, Leakage take a look at, Floor treatment method.
6. Substance Available: Aluminum, Aluminum Alloy(ADC10, ADC12, A356, A380, A383…and so on), Zinc, Zinc Alloy, Magnesium, Copper and so forth.
seven. Accessible computer software: Professional/E, Car CAD, Solidwork.
8. Second & 3D Drawings (Igs, PDF, JPEG, DWG, CAXA, UG, Stp, and so on.) could be produced and presented based mostly on the samples.

Item Features:
1. Software: OEM Idustries
2. Substance: Aluminium Alloys
three. Die casting tools: 160T~1500T
4. Mould material: H13
5. Mould life: 50, 000 pictures
6. Major approach:
    -one. Machining tools: CNC, Lathe equipment, Milling equipment, Drilling device, Grinding equipment, and so on
    -2. Surface area treatment: Powder coating, Anodization, Chrome plating, Portray, Sand blasting, Nickel Plating, Zinc Plating, Blacking, Sharpening, Bluing…and so forth.
    -3. Heat treatment: T3 – T8.

About Al Die Casting functionality:
1. Certificate: CZPT: 2000
2. OEM & ODM merchandise variety: Auto elements, Engine components, CZPT products areas, Lights elements, Prepare components, and so forth.
three. Die casting products functionality: 180T/280T/400T/600T/800T/1000T
4. Solution weight: From .05~10kg
five. Machining tools: CNC, Lathe device, Milling equipment, Drilling machine, and so on
six. Test products: Optical Spectrum Analyzer, CMM, Hardness take a look at products, Tensile check machine
seven. Surface area remedy: Powder coating, Anodization, Chrome plating, Portray, Sand blasting.
eight. Package: Packed or as your needs

Quality Manage: 
one. Good quality control: The faulty goods rate is considerably less .1%.
two. Sample and pilot run will be offered 100% inspection for the duration of generation and before cargo, Sample verify for mass production according to ISDO standard or consumer requirements
three. Check equipment: Spectrum Analyzer, CMM, Hardness take a look at products, Stress test machine
four. Following-product sales providers are CZPT all time.
five. Top quality scenario can be traceable.


  1. Motor areas,
  2. Car elements,
  3. CZPT Areas,
  4. Rail Train components,
  5. Truck Components,
  6. Tractor Areas
  7. CZPT Equipment  
  8. CZPT Tools
  9. Other industrial fields.

Professional Terms:

one. OEM & ODM the two approved. Merchandise can be created and created as per customer’s requirements in varieties of Samples, Drawings or even just a draft notion.
two. More than 20 a long time of encounter in casting, welding, forging and precision machining for US, CZPTpean and other abroad marketplaces.
3. Leadtime (Negotiable) :
    – For toolings: about 15-35 times.
    – For samples: 7- 15 times.
    – For batch manufacturing: 25 days.
4. Payment phrases (Negotiable):
    – For toolings: 100% pre-payment ahead of improvement.
    – For samples: For free of charge except if the sample(s) worth is way too big.
– For mass generation: thirty% down payment prior to creation (and right after samples approval), stability 70% before shipping.
5. Package: Carton Box, PlyWood Box, CZPT Export Pallets or as per customers’ needs.
six. Transport terms: EXW, FOB, CFR, CIF, DDP, DDU…all could be recognized.

Other Metalforming Capabilities We Have: 

Approach Content
Misplaced Foam Casting Ductile iron GGG 40 to GGG 80 / Grey Iron
ASTM 60-40-18 / 65-forty five-twelve / 80-55-06 / one hundred-70-03
Carbon metal, Hello-Mn steel, Hello-Cr metal
Austempering ductile iron
Warmth resistant metal / Dress in resistant metal
Sand Casting Inexperienced Sand Gray Iron, Ductile Iron, Malleable Iron, Stainless Steel, Carbon Steel, Aluminum Alloy, Brass, etc
Furan Resin Sand
Cold Harden Resin Sand
Investment Casting Sodium Silicone
(Water glass)
Stainless Metal, Carbon Steel, Special Alloy Metal, Brass
Silica Sol
Forging Hammer Forging Stainless Metal, Carbon Steel, Alloy Metal, Brass, Aluminum
Die Forging
Roll Forging
Die Casting Higher Stress Die Casting Aluminum, Zinc, Brass
Low Stress Die Casting
Gravity Pressure Die Casting
Surface End Powder coating, Anodization, Chrome plating, Portray, Sand blasting, Nickel Plating, Zinc Plating, Blacking, Sharpening, Bluing, and many others.
Machining Lathe, planer, drilling, boring, tapping, line reducing, milling, CNC
Inspection Examination tools: Spectrum Analyzer, CMM, Hardness take a look at products, Tension take a look at device.


Q: Do you make CZPT goods or finished areas?
A: We make OEM  or ODM merchandise, all areas are not in stock, customized produced according to customer’s drawings or samples! If you have any components to be created, please really feel cost-free to send your drawings/samples to us

Q: Will my drawing be risk-free soon after you get it?
A: Sure, we will not release your design to third party except if with your authorization. And we can sign the NDA prior to you send out the drawing. 

Q: What is the MOQ?
A: Normally we don’t set MOQ, but the a lot more, the less expensive. In addition to, we are pleased to make prototype portion or sample for consumers to make sure high quality common.

Q: Whether or not some samples can be provided?
A: Sure, sample price is required, but we will return it back again when continue into mass creation. If a tooling is necessary, we will demand the mold charge before starting. 

Q: What is your goods assortment?
A: OEM & ODM items variety: Vehicle elements, Truck Components, Engine components, CZPT equipment areas, Prepare areas, CZPT, and so forth.

Q: What is machining equipment do you have ?
CNC, Lathe device, Milling machine, Drilling machine, and so forth..

Q: Do you have any test gear?
A: Yes, we have Optical Spectrum Analyzer, CMM, Hardness check equipment, Tensile take a look at equipment.

Q: How to offer it when they are located to be in very poor quality?
A:  Please rest assured that all of our merchandise are QC inspected and recognized with inspection report prior to delivery and generally there will be no non-conformance in case of non-conformance, make sure you contact us immediately, sending us some images or video clips or ship the defective products to us for substitute. 

Get in touch with Us

Aluminum Auto Part by Die Casting